The main uses of non-silicon defoamers
Non-silicon defoamers are used in areas with special requirements for surface tension, because most polysiloxane defoamers will strongly reduce interfacial tension.
In addition, polysiloxane defoamers cannot be used for coating construction that requires repeated coating, because polysiloxane defoamers may have sliding/anti-sticking effects, and ionic (non-silicon) defoamers are required. Features: Non-silicon defoamers are produced with imported equipment and technology. They are non-silicon defoamers for hydrophilic medium systems. Because they do not contain any organic silicone components, they will not cause silicon spots to remain on the tank wall, and the equipment is easy to clean. It is important to add it to water-based glue (such as white latex, acrylic resin glue, acetate resin glue, epoxy resin glue, etc.), waterproof coatings, water-based inks, water-based inks, and water-based varnishes to not only defoam, but also will not cause product shrinkage and corns. It is especially helpful for the PCB (circuit board) industry, water-based paint wastewater, and mesh wastewater treatment industries.
Application: Mainly applicable to PCB circuit boards (development, ink removal, sewage links); chemical industry (all chemical production and use links); electroplating (medicine production, electroplating tank); printing and dyeing; papermaking (pulping, papermaking, sewage links); medicine; waterproof coatings; water-based inks; water-based inks; water-based varnishes; water-based glues; ceramic slitting and polishing processes; steel plate cleaning; aluminum processing; various sewage treatments and defoaming and antifoaming in various industrial water systems. Defoaming in water treatment systems such as cooling circulating water power plants. It can quickly eliminate the foam generated by sludge, water treatment agents, bactericides, etc., and will not block the mesh circulating water treatment.
Usage: 1. According to different foaming systems, adjust the amount of non-silicon defoamer used, and the recommended use range is 0.4‰-5‰. 2. Dilute with water or working fluid and stir evenly or add directly when using. 3. It can be used in aqueous systems below 100℃. 4. Please stir evenly when using.
