Introduction to Defoaming Agents for Industrial Wastewater Treatment
The faster the defoaming rate, the better. Then check the anti-foaming time of the sewage treatment defoamer. If bubbles are generated again in a short time after defoaming, it cannot be selected. In other words, it takes a long time to foam or no foaming, which means that the anti-foaming is good. Under the same conditions, the less the amount of sewage treatment defoamer is added, the better. Of course, the amount added will be slightly different according to the different foaming systems. We will help you test so that you can add the appropriate amount.
Different industries need to choose different types of sewage defoamers. The defoamers used in different industries are different. For example, the printing and dyeing industry needs to choose textile sewage treatment defoamers, while the papermaking industry,
Check the compatibility of the sewage treatment defoamer with the sewage treatment system and whether it has an impact on its own products. After the defoamer is added to the stock solution system, it should be stirred evenly, and then the speed and stability of the compatibility between the two should be checked. If the compatibility is not good, it cannot be compatible, and it has an impact on its own products, it is better not to use it.
The amount of sewage treatment defoamer is the same. The less the amount added, the better. Of course, the amount added will vary slightly depending on the foaming system, and we will help you experiment so that you can add the appropriate amount.
